The Philips Xitanium LED Driver for single-phase rail up 36w to 42w, is prepared for operation of more than 50,000 hours. Specially designed for installation in three-phase rail lights.

Input: AC220-230V Output DC30-40V

Out: 0.7/0.85 A (DC Amps)

Our LIFUD Dimmable LED Driver for luminaires up to 40W NO FLICK with an output range of 550mA to 1050mA, is designed for any application as its output does not incorporate any connector. Dimmable 1-10V.

Input: AC220-240V - Output DC9-42V (550mA -1050mA)

The PHILIPS LED Xitanium Essential Programmable (EP) drivers are designed to offer maximum reliability and flexibility, making them a preferred option for outdoor applications. The key feature is adjusting the output current with the new e-set tool, a simple and quick way to configure the driver without the need to turn it on and without software configuration.

Input: AC100-277V Output DC27-42Vdc

Output: 1.3-2.0Adc (DC Amperes)

Driver: Power supply for 45W LED luminaires with 600mA range.
Input: AC85-265V; Output DC55-86v 600mA.

Driver for 65W LED luminaire with  1750mA range. It is a current and voltage transformer for LED luminaires. Model that has IP65, which allows its use both outdoors and indoors.

Output: DC20-40Vdc 1750mA - GXTRONIC

The MOSO LED Driver - Dimmable and Programmable - X6-075M - for LED luminaires up to 75W, is rated for operation over 50,000 hours (13 years life at 10 hours/365 days). Universal input voltage / high range: 90 to 305 V AC. Surge protection: 5KV line-to-line, 10KV line-to-ground. Adjustable and programmable output current (AOC). 3-in-1 dimmable: 0 ~ 10Vdc, PWM, Dimming timer. Dimmable to off. Compact aluminium housing with perfect thermal insulation. IP67. With "BLACK BOX" register function. 7 programming steps.

The Philips Xitanium LED Driver 34W/a 0.7-0.8A 40V 3CB 230V  for single-phase rail up to 34w, is prepared for operation of more than 50,000 hours. Specially designed for installation in three-phase rail lights.

Input: AC220-230V Output DC30-40V

Out: 0.7/0.85 A (DC Amps)

The Philips Xitanium LED Driver for single-phase rail up to 34w, is prepared for operation of more than 50,000 hours. Specially designed for installation in three-phase rail lights.

Input: AC220-230V Output DC30-40V

Out: 0.7/0.85 A (DC Amps)

Dimmable DALI multicurrent driver 42w. Dimming with DALI protocol. Constant current output, for LED luminaires of 3-42V and intensity between 600ma and 1100ma. The driver incorporates EMC filter, does not produce flicker (NO FLICKER) and regulates in a fluid and constant way the lighting without jumps and without noise.

The Philips Xitanium Driver for 100W LED luminaires is prepared for an operation of more than 50,000 hours. Protection against overvoltages incorporated in the same driver of (di. Mode) 6K (comm. Mode) 10K.

Input: AC220-240V Output DC31-93V

Out: 03-1.05Adc (Amps DC)

Dimmable TRIAC driver for LED luminaires up 18W a 25W with 300mA range.

• Input: AC220V ~ 50/60Hz;
• Output DC60-90V 300mA.

Dimmable TRIAC driver for LED luminaires up to 7W with 300mA range.

• Input: AC220V ~ 50/60Hz;
• Output DC12-24V 300mA.